Picote Brush Coating involves coating a damp-proof, corrosion-resistant, wear-resistant and non-corrosive lining to a pipe.
Renovate old or deteriorated drains and sewers from DN32-300 /1¼" to 12" diameter with the Picote Brush Coating™ System. The coating applied provides a damp-proof, corrosion-resistant, wear-resistant and non-corrosive lining. Several coats can be applied within the same pipe. Renovate entire piping systems for example apartments or blocks of flats with minimal disruption, avoiding costly excavation.
• Picote 100% Solids Epoxy Resin. Used to rehabilitate decayed and damaged concrete, PVC, fibreglass, clay, cast iron and ductile pipelines. The dual colour method allows for clear visual verification during application. Designed exclusively for the Picote Brush Coating™ System.
• Picote is NSF 61.5 Certified, ASTM Certified and WRC Approved
Uses & Benefits
This product has been created to renovate drains, sewers, water pipes, electrical conduits, heat and a/c ducts and more by brush casting a coating. The specially formulated coating resin forms a semi-structural enhancing corrosion-resistant barrier inside the original pipe that is a tested, safe and environmentally friendly product. The new pipe is damp-proof, corrosion-resistant, wear-resistant and non-corrosive. Thanks to a high breaking stretch, it also withstands shocks and bending. The new pipe becomes elastic and antistatic.
1. Extend the life span of the original pipe: The resin can be used to prolong the life of an existing pipe. Clean the pipe well. Apply single (0.5-1mm/coat) or dual coats of the resin. The new slick inner surface will increase the flow inside the pipe minimizing the risk of blockages.
2. Create a new semi-structural pipe: Apply several coats of the resin forming a seamless new pipe with a 2-4mm wall thickness depending on the diameter of the drain. Estimated 30-50 year design life when using Semi Structural Design Specifications based on pipe diameter.